Toasted pale malt in a 375 degree oven for 20 minutes. Cracked it along with the crystal and steeped in 2 quarts of 150-175 degree water for 20 minutes. Sparged with approx. 1 gallon of water. Dissolved DME in sparge water plus cold water to make 3 and 1/2 gallons. Boiled for 60 min., adding hops and Irish Moss for indicated times. Chilled with a 2-gallon ice block and 20 degree outdoor temps. Racked off hot/cold break, topped up to 5 gallons, pitching a 2-3 cup starter at about 90 degrees. IBUs approximately 37. Single-stage fermentation for 14 days; bottled with 3/4 cup priming sugar. F.G. = 1.022, a little high, but fermentation was definitely done. I did a side-by-side comparison of this brew to a bottle of Anchor Steam, and here are the similarities/differences: This beer is exactly the same color as Anchor Steam, but its a bit cloudier due to a little chill haze. The head is neither as big nor as long lasting as Anchor Steams, but it clings to the side of the glass better. This beer has more body than Anchor Steam, and it is a bit maltier and sweeter; Anchor Steam is crisper with more hop bitterness. It is not as carbonated as Anchor Steam, although it would not be considered undercarbonated. All in all a very good beer. Original Gravity: 1.049 Final Gravity: 1.022 Primary Ferment: 14 days at 68--71 degrees. Recipe By : Serving Size: From: Cindy@sierra.Uucp (Cindy Johnston File ftp://ftp.idiscover.co.uk/pub/food/mealmaster/recipes/mmdja006.zip
Find any recipe, add your own, make grocery lists easily from recipes. Enter any 3 ingredients and BigOven will tell you what you can make. It's free! (4.5/5 stars)